The Sun StorageTek DAT 72 tape drive provides reliable, cost-effective data protection for entry-level and midrange servers and workstations. It has a native capacity of 36 GB per cartridge and a native throughput of 3 MByte/sec. And it can store up to 72 GB of compressed data, making it ideal for local backup. The Sun StorageTek DAT 72 tape drive comes in either a rackmount or desktop format, or as an internal option for many Sun servers. The rackmount configuration comes standard with 1 drive in a 1U form factor, with the option of adding a second drive. The Sun StorageTek DAT 72 tape drive protects your investment, providing reads and writes of DDS-3 and DDS-4 media for a painless upgrade path.
|
- 1 DAT 72 drive
- Capacity of up to 36 GB native
- Up to 3 MB/sec. throughput
- Rackmount or desktop
|
 |
- CAPACITY AND PERFORMANCE :
- Sustained transfer rate: 3MByte/sec. (MBps) (10.8GB/h) native, 6MBps (21.6GB/h) with hardware data compression (2:1)
- Burst transfer rate: 6MBps maximum asynchronous, 40MBps maximum synchronous
- Interface: Ultra Wide SCSI LVD
- MTBF: > 400,000 hours at 12% duty cycle
- Search speed: 65 seconds average file access time using a DAT 72 tape cartridge
- Recording Format: ANSI/ISO/ECMA, DDS-3, DDS-4, and DAT 72
- Media: DAT 72 (72GB), DDS-4 (40GB), DDS-3 (24GB) Media Recognition System cartridges
- Form factor (internal): 5.25 in. (8.9 cm) half-height
- OPERATING SYSTEM :
- Solaris 8 Operating System
- Solaris 9 Operating System
- Support for Solaris 10 x86 (64-bit), Red Hat Linux (version ES 3.0 U3 and later), and Microsoft Windows (version support varies) on Opteron-based Sun Fire V20z, V40z servers and Sun Java W1100z, W2100z Workstations.
- SUPPORTED SOFTWARE :
- Sun StorEdge Enterprise Backup Software 7.0 and later Veritas NetBackup 4.5 and later Embedded system utilities for Solaris, NT, and Linux
- SUPPORTED PLATFORMS :Desktop and Rackmount:
- Via both HBA and on-board SCSI port, where available:
- Sun Blade 100, 150
- Sun Blade 1000,1500, 2000, 2500
- Sun Enterprise 250 and 450
- Sun Fire 280R
- Sun Fire V120, V210, V240
- Sun Fire V250, V440, V480, V88
- Sun Fire V60x,V65x (Solaris 9, x86 and via on-board SCSI only)
- Netra 120, 20, and 240 (Note: DAT 72 desktop is not NEBs compliant)
- Internal server options:
- Sun Fire V250, V880
- Sun Fire V1280, E2900
- POWER REQUIREMENTS :
- External tape drive 100-240V, 0.5A, 50 - 60 Hz
- Internal tape drive +5V DC, 0.9A; +12V DC, 1.5A peak(< 1 sec) +5V DC, 0.5A; +12V DC, 0.55A typical
- ENVIRONMENT :Temperature
- 5 degrees C to 40 degrees C operating
- 40 degrees C to 70 degrees C nonoperating
Humidity
- 20% to 80% operating, 5% to 95% nonoperating
Altitude
- 0 to 4,600 m operating, 0 to 15,200 m nonoperating
- REGULATIONS :Meets or exceeds the following requirements:
Safety
- UL-1950, CAN/CSA-C22.2, CSA no. 950-M89, CSA C108.8, EN60 950, TUV
RFI/EMI
- DIN/VDE 0805, EN 55022, EN 60555-2, FCC MP-4, VFG243/1991
- DIMENSIONS AND WEIGHT :
- HxWxD: External tape drive 3.7 x 4.6 x 8.7 in. (95 x 116 x 220 mm)
- Internal tape drive 1.6 x 5.8 x 6.4 in. (41 x 147 x 162 mm)
Weight
- External tape drive 4.6 lb (2.1 kg)
- Internal tape drive 2.2 lb (1 kg)
- WARRANTY :For warranty Terms and Conditions, see the Warranty Website at: http://www.sun.com/service/warranty/product_warranty_chart.html
|
|
|
